- DAMAGE-FREE SETUP & REMOVAL: Installs in less than 2 minutes using damage-free 3M Command Adhesive Strips (included) that are rated to hold up to 5lbs (2.25 kg) each; no screws or holes required; intended for use on smooth, flat surfaces (Screw-in versions sold separately; Koala Mount & Koala Mount 2.0).
- UNIVERSAL: Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. This includes the iPad 1, 2, 3, 4, New iPad 9.7, Pro, Air, Air 2, Most Samsung Tablets, and many more. The brackets will fit any device 11mm thick or less. Can be used with protective cases left on if total thickness is under 11 mm).
- NOTE ON COMPATIBILITY: While it does fit most popular tablets, the bracket supports can block ports/buttons on either side between 1.5 – 3.75 inches up from the bottom (7-8″ tablets, like the iPad Mini may have blocked ports in landscape mode – see our Koala Mount 2.0 if this may be an issue).
- SIMPLE: Super easy docking and undocking, can be set up in portrait or landscape mode. No extra accessories required; no special cases or attachments onto your tablet. Full access to ports/buttons on larger devices 7-8″ devices may be better with our Koala Mount 2.0. Built-in cord clips to help keep track of your cord.
- MOUNTING: These come with Regular 3M Command strips that are not designed to work in areas exposed to high heats or moisture (like the bathroom). 3M makes special water and heat resistant strips for this. Also, all Command Strips don’t tend to work well on textured surfaces and some wallpapers. We strongly recommend performing our Strength Test. Command Strips are not reusable once they’ve been removed.
Dockem Koala Tablet Wall Mount: Universal Damage-free Adhesive Wall Dock for iPads, iPad Airs, Galaxy Tabs and other Tablets [black]
![Dockem Koala Tablet Wall Mount: Universal Damage-free Adhesive Wall Dock for iPads, iPad Airs, Galaxy Tabs and other Tablets [black]](https://amanaonlineuk.com/wp-content/uploads/2025/06/dockem-koala-tablet-wall-mount-universal-damage-free-adhesive-wall-dock-for.jpg)
Best Prices
Dockem Koala Tablet Wall Mount: Universal Damage-free Adhesive Wall Dock for iPads, iPad Airs, Galaxy Tabs and other Tablets [black]
£11.49
in stock
Amazon.co.uk
Koala Damage-free Tablet Wall Mount Dock by Dockem (Black Version)
£16.39
in stock
Onbuy.com
Highest Price
£11.49
Amazon.co.uk
June 20, 2025
Lowest Price
£11.49
Amazon.co.uk
June 20, 2025
Since June 20, 2025
I may earn a commission at no cost to you
| Brand | |
|---|---|
| Colour | |
| Compatible devices | |
| Compatible phone models | ['iPad Air', 'iPad Pro', 'Samsung Galaxy Tab', Mini'] |
| mounting type |
10 reviews for Dockem Koala Tablet Wall Mount: Universal Damage-free Adhesive Wall Dock for iPads, iPad Airs, Galaxy Tabs and other Tablets [black]
Customer reviews are sourced from third-party websites. We cannot guarantee their authenticity or accuracy.
×
Related products
- Sale!
SHUOSUO Tablet Stand Adjustable & Foldable, 360° Swivel Heavy Aluminium Tablet Holder for Desk, Compatible with iPad Pro/Air/Mini, Galaxy Tab, Surface Pro, Kindle Fire (7-13″)…
Ipad & Tablets Original price was: £33.99.£32.95Current price is: £32.95.
James Armstrong –
OK, does the job but it’s 2 small pieces of plastic and 2 sticky pads. Way over priced
Phoenix01 –
El producto es de mala calidad , no es como el que se muestra en la imagen , no ahí manera de ponerle tornillos solo trae 2 tiras de cinta doble cara que obviamente no soportaran el peso de una tablet .
Mr. Gary Barber –
I’ll start off by saying that approx £10 does seem like a lot of money when all you get in return is a small box, with two bits of plastic and a couple of sticky strips in it.
With that out of the way, what you’re really paying for here is a secure, quick, simple way of wall mounting pretty much any tablet, without drilling into your walls which can be removed without damage when you need to remove it. With that in mind I think the asking price isn’t too bad. I still think it could be a bit cheaper, but the benefits make up for that.
The two bit of plastic are held to the wall using sticky strips from 3M. I was dubious at first that what appeared to be a couple of bits of double sided tape would hold my tablet securely to the wall.
It’s been up there a few months now and hasn’t shifted a bit.
One of the great things about this, is that since the two supports are completely separate, they can accommodate pretty much any size of tablet.
That said, I did have to get busy with a craft knife and do some trimming. But only because the old Hannspree Hannspad I was wall mounting is a bit bulky. It also has the power connector quite high on the side so I had to make a new hole to connect the power. But neither of those problems are down to the product itself. So I’ll give it a solid 5 stars.
あらたまきよたま –
Die Halterung kam gut verpackt an. Durch die Verchromung sieht sie hochwertig aus. Dadurch, dass die Hslterung eine “Einführjilfe” für die Klebestreifen haben, können die ganz leicht, gerade und einfach angebracht werden. Danach hält die Halterung das Tablet sicher an der Wand und sieht auch noch gut aus.
SHOPPER –
素材の下地処理が雑でまたバリ線が目立つし、メッキも今時ありえないぐらい安っぽく均質さがない。宣伝写真のように鏡面的で落ち着いたクロームとかを期待してはいけません。100円ショップレベルです。
Phoenix01 –
Diese einfache Halterung hat genau meine Anforderung erfüllt: sie ist sehr schmal & das Tablet hält fest und stabil. Einzige Kritik ist der doppelseitige Kleber, der überhaupt nicht hält und sich nach der 1h Fixierzeit wieder gelöst hat, als ich das tablet nur reingestellt habe. Zum Glück konnte ich das tablet noch auffangen. Habe dann zwei kleine Schrauben die Halterung fixiert und alles war gut.
Update: 6.12.2024: basierend auf der Rezession wurde umgehend mit mir Kontakt aufgenommen. Das nenne ich einen TOP Service
Lulu –
Edited to add update, please read all of it, this seller is awesome! Firstly, the seller was very helpful, I was mailed when the item was dispatched, it came on time and they have since mailed me asking if everything is OK. It was a gift for my OH who is a gadget freak, a novel thing to have. He has fixed it to the wall today to have his phone on in the kitchen while he was doing things. He followed the instructions, affixed the sticky tabs accordingly, then put his phone in the bracket after applying pressure etc etc etc. Sad to say the bracket held but the sticky tabs didn’t. The phone didn’t fall far but still, if he’d put the tablet in this, it would be a very costly repair.
*additional information please read*
I then contacted the seller to make them aware of our troubles. Paul at Dockem replied within 48hrs and offered his apologies. He needed to understand what had happened and why. So he asked me some usual questions about the wall, I answered them honestly. He then told me he was sorry and offered to send out more sticky tabs for the dock. I accepted this and thanked him for his reply as let’s be honest, most businesses wouldn’t have bothered for a relatively low cost item.
The sticky tabs arrived as well as another dock free of charge. What lovely customer service that is.
I have applied the tabs and truly am impressed. It must have been the tabs in the first place as this now holds firmly and works perfectly with my S5 Galaxy. I highly recommend this item and seller, they truly were giving exemplary customer service.
SHOPPER –
Great idea! Works as planned, Just had to FIX THE DESIGN of this cheap plastic bracket. Let me show you…
…
I felt jumping into this purchase that this product would probably be overpriced based on grade and quality, but I wanted the functionality and I wanted it $15 worth of NOW. This would be a more valuable product if made of cast aluminum and the finish would appear better too, but it’s plastic. The cheap plastic injection molding cannot cost more than a penny or so each in large quantities. Having one in hand now, I could see scanning into a 3D printer setup and making my own replacement, at a cost of under a dollar. The cheap chrome painted surface on the original I don’t expect to last very long. The finish is very inconsistent, being shiny smooth in some places whilst dull and rough in others.
…
The 3M tape is great, I’ve used it with many packages of inexpensive hooks. It comes OFF easily and works securely against a SMOOTH FINISHED surface. Sadly, my needs were to wall mount it on a wood wall. Even on a painted wall, I would not trust the 3M tape to hold up a $300 tablet, based on my experience with 3M tape. IMHO the tape is great stuff, but only for certain conditions.
…
But you can fix this! This is the part where had the engineers had at least half a brain, they’d have put a hole in the mount so that it could be screwed to the wall. Yep. Did it. I took a drill, bored a small hole, applied the tape, and then added a screw to the bracket. YES, I GET IT, the purpose of the 3M tape is to avoid marring the wall and a hole i the wall runs counter to that. BUT the purpose of the mount, is to HOLD UP THE TABLET not “maybe” hold up the tablet.
…
There seem to be a lot of vendors selling these in the $14.99 to $19.99 price range. I chose a vendor somewhat at random but my review is about the product not the vendor. The packaging was great and the delivery was speedy. Thank you Amazon and thank you vendor.
..
If you like my review, please bump it. Have a comment? Leave it. Have a product you’d like me to try? I’ll be diligent and honest.
Techsponge –
Does what it states it does.
A very simple product but effective and comes provided with Strong Command 3m adhesive strips.
There is really nothing else on the market at the moment as simple and as neat as this.
Initially it may seem a little overpriced but i understand there is a cost of getting product to market whether big or small. However it Does 100% tick all the rest of the boxes e.g Design,Strength,Durability,Small Footprint and versatility.
You can get more product for your money But ..Can it do the job as intended and Will it be as neat.
L. Davidson –
I got one of these to hang my Nexus 7 tablet on the wall by my bed, so I had somewhere safe to put it after browsing/gaming before going to sleep.
I was a bit worried that it would not stick well to my textured wallpaper, but it has held up for a good few months now. (Maybe it helped that I found a position where the texture was mostly flat, since the wallpaper pattern has some areas flatter than others.)
The design seems great, and I can slide the tablet in without much light, looking at it upside down while in bed. 🙂 Even when I can’t see what I’m doing, the plastic is very smooth so I don’t feel there’s a risk that I’ll damage my tablet when I miss.
The little hooks (or whatever you’d call them) for holding a charging cable are a nice touch, but I’ve stopped using them as I like to be able to take the tablet off the wall while it is still charging (and I also kept doing that without realising it was still attached on a short leash, heh). (Also, I sometimes want to charge my phone on a windowsill using the same charger, so having the cable free makes more sense.) Still, they’re good for some scenarios, and they’re tiny things hidden under the bottom lip of the brackets, so you won’t know they are there if you don’t use them.
All in all, a great design that has stood up well.
The narrowness of the slots means they would not fit my old phone (Nexus S), as it has a bulge at the bottom which is a bit too thick, but they fit my Nexus 7 tablet perfectly (with a bit of room to spare), and would also fit my new, thinner phone (Nexus 4). The same company have another model which would be more suitable if you have a thick phone.