Jubor Tablet Car Stand with Suction Cup, 360° Rotate Adjustable iPad Car Mount, Dashboard Windscreen Tablet Holder for iPad Air Mini, iPhone, Galaxy, 4.7-12.9″ Tablets and…
Jubor Tablet Car Stand with Suction Cup, 360° Rotate Adjustable iPad Car Mount, Dashboard Windscreen Tablet Holder for iPad Air Mini, iPhone, Galaxy,...
Tablet Car Mount – This tablet car mount comes with strong suction cups and a metal base that allows you to easily attach the mount to your car, windscreen, wall, table, glass or any other flat surface. The suction cups are very strong, which ensures that you can keep your tablet or mobile phone stable while driving and don’t have to worry about the tablet falling off.
Multi-angle Rotation – The metal ball head attached to this tablet car holder can be rotated 360 degrees, and the angle of the metal arm can be adjusted 180 degrees by adjusting the screw of the metal arm, which can meet your different angle needs. While driving, whether you are navigating, listening to music or talking on the phone, your view will not be obstructed, giving you a safe ride and comfortable operation.
High Compatibility – The iPad car mount fits all tablets and phones with screen 4.7-12.9″. Compatible with iPad Pro 9.7‘, 12.9’, iPad Air 5/4/3/2/1, iPad 10/9/8/7/6/5/4/3, iPad 6/5/4/3/2/1, Microsoft Surface Pro, Galaxy Tab Pro and iPhone 16 Pro Max, iPhone 16/15/14/13/12/11 and many more. Highly compatible with all tablets and mobile phones. Note: This tablet stand can only install the tablet horizontally, not vertically.
Strong Suction Cup – The tablet stand for the car dashboard is equipped with suction cups made of special TPU material. You only need to attach it to a smooth surface to keep it firmly in place without worrying about the holder falling off. The suction cups are washable and reusable. The four corners of the holder are padded with soft foam to better protect the tablet from scratches.
Easy to Install and Operate – This tablet car mount can be mounted directly on any smooth surface with suction cups, you can also peel off the adhesive backing of the base and attach the mount to the base after mounting the base on a flat surface for quick and semi-permanent mounting on any flat surface.
iPhone 16/16 Plus/16 Pro/16 Pro Max, iPhone 15/15 Plus/15 Pro/15 Pro Max, iPhone 14/14 Plus/14 Pro/14 Pro Max, 13/13 Pro/13 Pro Max, iPhone 12/12 Pro/12 Pro Max, iPhone 11/11 Pro/11 Pro Max, iPhone X/XS/XR/XS Max, Galaxy S9 S8 S7 Edge, Huawei and More See more
13 reviews for Jubor Tablet Car Stand with Suction Cup, 360° Rotate Adjustable iPad Car Mount, Dashboard Windscreen Tablet Holder for iPad Air Mini, iPhone, Galaxy, 4.7-12.9″ Tablets and…
Rated 5 out of 5
mr g mcgeachie –
Well made and does it’s job well
Rated 4 out of 5
Arslan Muhammad akhtar –
The ‘Jubor Tablet Car Stand with Suction Cup, 360° Rotate’ arrived in a printed box.
This mount came with no instructions on how best to install or use it, so the installer is left to work it out themselves. Fortunately it is relatively simple even when using the adaptor plate.
The tablet holder is un-sprung so when the button on the rear is pressed to release the clamp, the user has to manually move the clamp to widen the gap, then with the tablet in place it is just pushed together again. To fit the ball into the back of the tablet mount, the nut must be completely removed. The last joint to which the ball is attached has a gear mechanism to control positioning rather than friction, and I found it held in position when the wing nut was tightened.
Moving towards the base, the main adjuster which has ball mounts both ends, and is made from cast metal, so quite rigid. When the wing nut was loosened due to it being a relatively short in length I found it easier to control compared to some others I have tried.
I have found in the past the weak point of these types of clamps is often the suction base. There is no additional adhesive layer on this one as some bases have so it is reliant on good suction which is where I have seen them fail. It will be interesting to see how long this one holds before needing reattaching, though it may prove more beneficial to just detach and re-attach once a week or so.
Rated 5 out of 5
John –
Really impressed with the product for the price would recommend
Rated 5 out of 5
Donk2827 –
Love this mount. We use it in our campervan. Very strong suction power – never fallen off or sagged when going over bumpy terrain. Very strong suction power- holds iPhones and 12.9” iPads in place easily when used for navigating or movie watching. Good price. Well made and easy to fit.
Rated 5 out of 5
j bennett –
Molto valido e stabile . Si attacca bene malgrado il sole a picco resta ancorata. Esiste anche la possibilità di attaccarlo con viti, non allegate, ma per ora non necessitano. L’ho montato su una citroen ami, sul cruscotto
Rated 5 out of 5
PeterH –
Very good quality and great adjustment range.
Rated 5 out of 5
John –
We bought ours to attach a kindle/tablet to the side of the bed. It works great. Used to the suction cup and sticker. Option for screws but ours held stable without. Lots of angle options and easy to adjust.
Rated 5 out of 5
Mark Emerson-Ford –
Nice works well with my sat nav
Rated 3 out of 5
roberto –
Den är robust i sin konstruktion men sugkoppen är styv slät plast och fäster inte om det inte är en absolut slät yta som tex glas. Misstänker att den skulle släppa där också så snart det blev en temperatur ändring. Fästa på ett bord fungerar inte alls.
Rated 5 out of 5
Rudy Van Den Bulck –
On l’utilise dans notre camion d’expédition pour regarder des films sur la tablette ou la tenir en mode gps dans la cabine. Elle tient bien. Sur les meubles (surface melaminée) nous avons du utiliser la plaque auto-adhésive fournie pour avoir un support fiable. Sinon le support ne tient pas. Les réglages sont variables et amples pour permettre une adaptation satisfaisante. Pour nous cela a été un bon investissement
Rated 5 out of 5
Janette Powell –
voldoet zekers aan de eisen voor mij
Rated 1 out of 5
Louise loben –
It does sticky to the window don’t buy its rubbish
Rated 5 out of 5
Arslan Muhammad akhtar –
Amazing product good quality. I have been searching for a while tried couple of mounts. Works for phone or tablet I’m using for the Samsung galaxy s9 ultra. But can only be used side ways you can see in picture and that’s how I needed it. ⚠️ just an opinion for the seller it could be made even better then what it is right now if it’s possible to make the main plastic part into maybe aluminum or the same material they used below.
mr g mcgeachie –
Well made and does it’s job well
Arslan Muhammad akhtar –
The ‘Jubor Tablet Car Stand with Suction Cup, 360° Rotate’ arrived in a printed box.
This mount came with no instructions on how best to install or use it, so the installer is left to work it out themselves. Fortunately it is relatively simple even when using the adaptor plate.
The tablet holder is un-sprung so when the button on the rear is pressed to release the clamp, the user has to manually move the clamp to widen the gap, then with the tablet in place it is just pushed together again. To fit the ball into the back of the tablet mount, the nut must be completely removed. The last joint to which the ball is attached has a gear mechanism to control positioning rather than friction, and I found it held in position when the wing nut was tightened.
Moving towards the base, the main adjuster which has ball mounts both ends, and is made from cast metal, so quite rigid. When the wing nut was loosened due to it being a relatively short in length I found it easier to control compared to some others I have tried.
I have found in the past the weak point of these types of clamps is often the suction base. There is no additional adhesive layer on this one as some bases have so it is reliant on good suction which is where I have seen them fail. It will be interesting to see how long this one holds before needing reattaching, though it may prove more beneficial to just detach and re-attach once a week or so.
John –
Really impressed with the product for the price would recommend
Donk2827 –
Love this mount. We use it in our campervan. Very strong suction power – never fallen off or sagged when going over bumpy terrain. Very strong suction power- holds iPhones and 12.9” iPads in place easily when used for navigating or movie watching. Good price. Well made and easy to fit.
j bennett –
Molto valido e stabile . Si attacca bene malgrado il sole a picco resta ancorata. Esiste anche la possibilità di attaccarlo con viti, non allegate, ma per ora non necessitano. L’ho montato su una citroen ami, sul cruscotto
PeterH –
Very good quality and great adjustment range.
John –
We bought ours to attach a kindle/tablet to the side of the bed. It works great. Used to the suction cup and sticker. Option for screws but ours held stable without. Lots of angle options and easy to adjust.
Mark Emerson-Ford –
Nice works well with my sat nav
roberto –
Den är robust i sin konstruktion men sugkoppen är styv slät plast och fäster inte om det inte är en absolut slät yta som tex glas. Misstänker att den skulle släppa där också så snart det blev en temperatur ändring. Fästa på ett bord fungerar inte alls.
Rudy Van Den Bulck –
On l’utilise dans notre camion d’expédition pour regarder des films sur la tablette ou la tenir en mode gps dans la cabine. Elle tient bien. Sur les meubles (surface melaminée) nous avons du utiliser la plaque auto-adhésive fournie pour avoir un support fiable. Sinon le support ne tient pas. Les réglages sont variables et amples pour permettre une adaptation satisfaisante.
Pour nous cela a été un bon investissement
Janette Powell –
voldoet zekers aan de eisen voor mij
Louise loben –
It does sticky to the window don’t buy its rubbish
Arslan Muhammad akhtar –
Amazing product good quality. I have been searching for a while tried couple of mounts. Works for phone or tablet I’m using for the Samsung galaxy s9 ultra. But can only be used side ways you can see in picture and that’s how I needed it.
⚠️ just an opinion for the seller it could be made even better then what it is right now if it’s possible to make the main plastic part into maybe aluminum or the same material they used below.