4 x 6ft galvanised steel structure: A tough shell, this metal shed is strong and stable – suitable for outdoor use.
Two ventilation slots: Brings air inside garden storage shed, helps prevent odour and keeps tools and equipment dry.
Pent roof: No rain water build-up on top of this outdoor shed. Helps prevent damage.
Large door: Easy access to outdoor tool shed. Latch for security, lock and keys included.
Installation: Compared with the common vertical plate design, our horizontal plate shed will be easier to assemble. 2–3 people recommend to build. Gloves included. Dimensions: 166.5/183H x 191W x 130D cm. Inner: 177W x 111D cm. Door: 161H x 75W cm.
8 reviews for Outsunny 6.3 x 4.3FT Garden Shed. Galvanised Metal Shed, Outdoor Tool Storage Shed with Pent Roof, Lockable Door and 2 Vents, Grey
Rated 4 out of 5
Amanda Wills –
Good little shed . Instructions were not the best so take your time to go through it!
Rated 1 out of 5
Allan M. –
When first opening the boxes some of the panels were dented and bent continued on it was a nightmare to build taking two days and the instructions are impossible to read. once finally seeing the end of the build there was bits missing. Stay well clear
Rated 1 out of 5
Jamie –
Firstly I should add that I’m a carpenter, so have all the tools. I should have made one but thought I’d take the easy route and additional metal protection.
Allow 5 hrs to construct and you will need two people. The metal is very flimsy and screws don’t have much purchase on the structure when putting together.
The pre drilled holes are 50% of the time not in line and I had a perfectly flat base. I had to redrill some holes.
Haven’t seen it in the rain but dubious as there are a few drilled holes in the roof that were not used to screw together.
Wouldn’t buy this or recommend unless you have someone to put it together for you, maybe go with a preformed plastic type.
Updated following rain, all water tight and holding together.
Rated 4 out of 5
Stu Coates –
This is a great product of excellent quality, but you will have to assemble it from scratch. I managed to build it on my own but I’d recommend getting someone to help you. As you are working with sheets of metal there are protective gloves provided, but these reduce your dexterity in handling the components so I ditched them pretty quickly and ended up with a few small skin slices on my fingers. There are a lot of screws to fit during the assembly process. The instructions are a little vague in parts so you really need to skip a page forward at times to see the next stage in assembly to gleam some detail relevant to the stage you’re at. I had to go back a step twice to change the way I’d done something as the detail was lacking in the instructions, but it was just small things. The finished product is really nice and I’m very pleased with it. It looks great and is very good quality so I expect it will last for many years.
Rated 4 out of 5
leanne magee –
It’s a lovely shed good instructions, but hard to put together, even with 2 to 3 people helping. It couldn’t be put together by one person! It took my friends who do DIY a day and a half to complete it! Prompt, quick service, good value, plenty of screws, but the screwdriver that comes with it is so small that it couldn’t really be used!
Rated 1 out of 5
MR D RUMNEY –
Instructions very poor and not clear,pretty flimsy,holes for screws mostly never lined up and some were still filled in.definitely would not recommend
Rated 4 out of 5
Stu Coates –
After spending quite a few hours over 3 days assembling, I’m reasonably happy with this shed.
The assembly instructions though do need to be improved significantly. While every step is set out, they are not well thought through and often require the removal of screws used in previous steps to complete later steps. The diagrams in the instructions are not of a quality where the orientation of some components is very clear. But once you get use to the design of the structure, it becomes easier to spot what’s required.
The materials themselves are of a reasonable quality, but the QA department need to wake up as many parts have holes still filled in (the punch failed to go all the way through), or in one case the hole was punched on the wrong end of the component, requiring me to drill a hole in the correct place.
Once the shed is fully assembled, be very careful when trying to move it – the base frame is not very strong and will buckle very easily.
Overall I’m happy with the purchase, and now could probably assemble another in less than half the time now I know the techniques that are used.
Oh, and I agree with another reviewer; the included screwdriver is pointless!!! Go get a really good screwdriver – you’ll need it as there are hundreds of screws!
Rated 2 out of 5
leanne magee –
The media could not be loaded.
The screws wasn’t lining up with the holes for each part and we had to miss some screws out.
The metal was flimsy as it was bent sone of them and it took us 3 days (28 hrs to build).
Last updated on July 19, 2025 10:31 pm
Amanda Wills –
Good little shed . Instructions were not the best so take your time to go through it!
Allan M. –
When first opening the boxes some of the panels were dented and bent continued on it was a nightmare to build taking two days and the instructions are impossible to read. once finally seeing the end of the build there was bits missing. Stay well clear
Jamie –
Firstly I should add that I’m a carpenter, so have all the tools. I should have made one but thought I’d take the easy route and additional metal protection.
Allow 5 hrs to construct and you will need two people. The metal is very flimsy and screws don’t have much purchase on the structure when putting together.
The pre drilled holes are 50% of the time not in line and I had a perfectly flat base. I had to redrill some holes.
Haven’t seen it in the rain but dubious as there are a few drilled holes in the roof that were not used to screw together.
Wouldn’t buy this or recommend unless you have someone to put it together for you, maybe go with a preformed plastic type.
Updated following rain, all water tight and holding together.
Stu Coates –
This is a great product of excellent quality, but you will have to assemble it from scratch.
I managed to build it on my own but I’d recommend getting someone to help you. As you are working with sheets of metal there are protective gloves provided, but these reduce your dexterity in handling the components so I ditched them pretty quickly and ended up with a few small skin slices on my fingers. There are a lot of screws to fit during the assembly process.
The instructions are a little vague in parts so you really need to skip a page forward at times to see the next stage in assembly to gleam some detail relevant to the stage you’re at. I had to go back a step twice to change the way I’d done something as the detail was lacking in the instructions, but it was just small things.
The finished product is really nice and I’m very pleased with it. It looks great and is very good quality so I expect it will last for many years.
leanne magee –
It’s a lovely shed good instructions, but hard to put together, even with 2 to 3 people helping. It couldn’t be put together by one person! It took my friends who do DIY a day and a half to complete it! Prompt, quick service, good value, plenty of screws, but the screwdriver that comes with it is so small that it couldn’t really be used!
MR D RUMNEY –
Instructions very poor and not clear,pretty flimsy,holes for screws mostly never lined up and some were still filled in.definitely would not recommend
Stu Coates –
After spending quite a few hours over 3 days assembling, I’m reasonably happy with this shed.
The assembly instructions though do need to be improved significantly. While every step is set out, they are not well thought through and often require the removal of screws used in previous steps to complete later steps. The diagrams in the instructions are not of a quality where the orientation of some components is very clear. But once you get use to the design of the structure, it becomes easier to spot what’s required.
The materials themselves are of a reasonable quality, but the QA department need to wake up as many parts have holes still filled in (the punch failed to go all the way through), or in one case the hole was punched on the wrong end of the component, requiring me to drill a hole in the correct place.
Once the shed is fully assembled, be very careful when trying to move it – the base frame is not very strong and will buckle very easily.
Overall I’m happy with the purchase, and now could probably assemble another in less than half the time now I know the techniques that are used.
Oh, and I agree with another reviewer; the included screwdriver is pointless!!! Go get a really good screwdriver – you’ll need it as there are hundreds of screws!
leanne magee –
The media could not be loaded.
The screws wasn’t lining up with the holes for each part and we had to miss some screws out.
The metal was flimsy as it was bent sone of them and it took us 3 days (28 hrs to build).